Steps to follow if your Heat Pump / Furnace has broken down!

Has your heat pump or furnace broken down at the last minute, and you aren’t sure what to do next? Well, here are the steps you should take:

Step 1: Turn off your system.

It would be best if you switched off any power supply to the buttons as soon as possible. Then, use your remotes (if applicable) to turn off your system and then remove any connected plugs.

Step 2: Find the problem.

Some of the most common reasons for a furnace breaking down include:

  1. Lack of maintenance
  2. Clogged filters
  3. Cracked pipes or heat exchanger
  4. Rusty or broken plates, ball-bearings, etc.
  5. Circuit problems

Step 3: Determine whether you can solve the problem yourself.

If you have experience repairing your furnace, you can try and solve the problem yourself. However, if you have no prior experience repairing furnaces, it is best to call a service that provides furnace service in Apple Valley, CA or heat pump repair Victorville CA services.

Step 4: Call a technician

When you call your technician, describe the problem you’re having and book a service. Some HVAC service providers also allow you to book services online through their websites. Please do not turn on your furnace until the technician has inspected it.

The technician will determine the cause of the problem and repair the furnace. However, you need to know what the problem was.

What will the technician do?

Dirty/clogged filter: If the problem is in your filter, the technician will likely change and replace the filters. You can ask your technician how often the filter needs to be replaced. This usually depends upon your usage and the model of your furnace. You can also ask whether you can do it yourself in the future.

Circuit Problems: If there is a problem with the circuit, the technician will rewire your furnace. It is important to always call a technician for circuit-related problems; otherwise, there is a chance of causing additional and, more importantly, permanent damage to the system.

Broken, Cracked, or rusty parts: If the problem is because of a broken, rusted, or cracked part like a belt, plate, or ball-bearing, the technician will likely replace this with a newer model. While this sounds like a simple enough job, it should never be attempted as a DIY.

Should you try a DIY?

We suggest you don’t try a DIY. Unless you have prior experience providing heating, ventilation, and air conditioning (HVAC) services, don’t attempt a DIY. Furnaces have delicate parts that determine the functioning of the entire system. If you try a DIY without prior experience, there’s a chance that one of the smaller or more delicate parts may be damaged. This can result in the entire system having more issues in the long run.

Who do you call?

If you’re a resident of California, call us at Taylor Made Air Inc. We provide excellent furnace repair Hesperia and heat pump repair Victorville, CA services. We’re an honest, reliable service that has been providing HVAC services in Hesperia and surrounding areas!